3D Design & Printing · Gurugram

Socho. Design Karo. Print Karo.

Send us an idea, a sketch, a photo or a broken part. We design it in 3D and print it layer by layer, ready to hold in your hand.

WhatsApp us

STL nahi hai? Koi baat nahi, photo bhejo, design hum kar denge ✌️

  • ₹5/gram se shuru
  • 2–4 din delivery
  • PLA · PETG · ABS · TPU
Namaste! Hum Deepak & Bal Krishan hain.Two engineers, one printer, a lot of chai →

LAYER 52/52·PRINT DONE ✓

filament:
aur bhi bahut kuch hai, neeche dekho

01 / Services

Kya banwana hai?

Design from scratch, or print a file you already have. One printer, done carefully.

No file?
No problem!

3D Modeling & CAD

Sketch, photo or measurements to a print-ready 3D model (STL / STEP).

From ₹300 / hour

3D Printing

Already have an STL? Send it. We print in PLA, PETG, ABS or TPU.

₹5–8 / gram

Rapid Prototyping

Test your product idea before spending on moulds. Fast design–print–improve loops.

Quote per project

Replacement Parts

Broken knob, clip, bracket or gear? Send a photo and we recreate it.

From ₹300

Custom Gifts

Name plates, keychains, desk items, trophies and corporate gifts with your logo.

From ₹300

Student Projects

Robot parts, models and final-year projects. Special rates for students.

Student rates

3D Printing Assistance

Have an STL but not sure it will print well? We work on your file and check every factor before printing, so it comes out right the first time.

Ask us on WhatsApp · free help in 3D Adda →

  • STL check & repair
  • Scaling & units
  • Orientation & supports
  • Wall thickness & tolerances
  • Infill & strength
  • Material choice
  • Filament colours

02 / Kiske liye?

Aap kaun ho? Batao.

Pick what fits you. Here's what people like you usually get made.

"Kal submission hai aur model abhi bana nahi…" 😅

Final-year projects, robotics parts, architecture models and mechanisms. Send your CAD, or tell us the idea and we'll help with the design.

Help with my project
  • Robot chassis & brackets
  • Gearboxes & mechanisms
  • Architecture & site models
  • Drone frames & mounts
  • Sensor & Arduino cases

03 / How it works

4 steps. Idea se haath tak.

  1. bas ek photo bhi chalega 01

    Idea bhejo

    WhatsApp a photo, sketch, STL file or just describe what you need.

  2. price pehle, kaam baad mein 02

    Design & quote

    We design or check your file and send a clear price and timeline.

  3. layer by layer, pyaar se 03

    Print

    Pay 50% advance. We print, clean and finish your part with care.

  4. aapke haath mein! 🙌 04

    Delivery

    Pickup or courier. Pay the rest when it's in your hands.

+ step 3½: we WhatsApp you a photo while it prints, taaki aap bhi excited raho 📸

04 / Instant Quote

Kitna lagega? Abhi pata karo.

Upload an STL file (it stays on your device) or enter an approximate weight. You get an estimate in seconds.

Drop your STL file here
or · up to 500 MB

No file handy?

OR
Filament colour Not sure
Colour doesn't change the price. We'll confirm what's in stock.

05 / Prices

Kitne ka padega?

Real examples worked out with the same formula as the calculator above (20% infill). Weights are typical; yours may differ.

Keychain

~8 g · PLA

₹—

Ek ka bhi ₹300, paanch ka bhi ₹300 😉

Replacement knob

~25 g · PETG

₹—

Phone stand

~80 g · PLA

₹—

Name plate

~60 g · PLA

₹—

Desk organiser

~200 g · PLA

₹—

Architecture model

~400 g · PLA

₹—

+ 3D design (if you don't have a file) starts from ₹300/hour. Price pehle batayenge, hamesha. 🤝

06 / Materials

Sahi material, sahi kaam.

Not sure which one? Tell us what the part will do and we'll suggest the right material.

PLA

Easy, accurate, many colours. Best for gifts, models, prototypes and display pieces.

  • Strength
  • Heat
  • Flexibility

₹5 / g

PETG

Tough and water resistant. Good for brackets, outdoor parts and food-contact containers.

  • Strength
  • Heat
  • Flexibility

₹6 / g

ABS

Heat resistant and machinable. For car parts, enclosures, jigs and functional parts.

  • Strength
  • Heat
  • Flexibility

₹6 / g

TPU

Flexible like rubber. Phone cases, gaskets, grips, bumpers and wearable parts.

psst… isse bend kar sakte ho!

  • Strength
  • Heat
  • Flexibility

₹8 / g

07 / Repair

Toota part? Mat phenko.

That one tiny clip that broke and made the whole thing useless? We can usually remake it, often stronger than the original.

  1. Photo bhejo with a ruler or coin next to it, from 2–3 sides.
  2. We model it in CAD from your photos and measurements.
  3. We print it in PETG or ABS for strength, and you check the fit.
Send photo of broken part
pehle 😢
baad mein 😍

08 / Our work

Kya kya ban sakta hai.

A few examples of what we make.

real photos jaldi aa rahe hain, abhi printer garam ho raha hai 🔥

09 / Hum kaun?

Do dost. Ek printer. Bahut saari chai.

MakeMeProto started on a desk in Gurugram. One of us designs, one of us prints, and both of us get a little too excited every time a print comes off the bed in one piece.

We're not a big factory. When you message us, you talk to the same two people who design, print and pack your part, so nothing gets lost in between.

— Deepak & Bal Krishan

Deepak DadheechMechanical engineer · the printer whispererAssistant Professor, Anant National University Connect on LinkedIn

Deepak se poocho 👇

  • Kaunsa material lein?
  • Strength & fit
  • Printer tuning
  • Finishing & sanding
Message Deepak →
Bal Krishan SwamiSoftware engineer · design & pixelsSoftware Technologist, Philips · Ex-Samsung Research Connect on LinkedIn

Bal Krishan se poocho 👇

  • 3D design / CAD
  • STL fix karna
  • Custom name gifts
  • Orders & website
Message Bal Krishan →

10 / Tips

Designing it yourself? Ye padh lo.

A few rules that save time, money and failed prints. If this sounds like too much, just send the file and we'll check it for you.

I have my STL ready →

Deepak ki diary ✏️ print-ready STL ke 6 rules

  1. Walls ≥ 1.2 mm. Patli deewar = toota part.
  2. Overhangs under 45° print without supports. Zyada jhuka? Supports lagenge.
  3. Moving / fitting parts: 0.2–0.3 mm ka gap chhodo.
  4. Max 25 × 25 × 25 cm in one piece. Bada hai? Hum tod ke jod denge.
  5. Export in millimetres. Warna 2 cm ka part 2 metre ka ban jaata hai 😅
  6. Text at least 1 mm raised or deep, so it actually shows.

— D.

11 / Community

3D Adda 🧡

Free help for anyone into 3D, even if you never order from us. Your own printer acting up, a design doubt, a file that won't slice, or you're just starting out. Pucho, hum batayenge.

no selling, no spam. bas madad. ✌️

Free file check

Send your STL. We'll tell you if it will print, what to fix, and how to orient it.

Printer doctor

Own a printer? Warping, stringing, clogs, bed levelling. Send a photo of the fail and we'll help you fix it.

Design doubts

Stuck in Fusion, Tinkercad or SolidWorks? Tolerances, joints, threads, snap-fits: ask away.

Starting out?

Which printer to buy, which filament, which software. Honest beginner advice from people who've been there.

Print fail ho gaya? Quick fix dekho 👇

Still failing? Send us a photo of the print. 📸

Apna sawaal pucho 🙋

Join the 3D Adda community →

Why MakeMeProto? (pakka promise!)

  • Engineers, not just a print shop. A mechanical engineer checks every design for strength and fit before it prints.
  • Clear pricing. You see the price before we start. No hidden charges.
  • Small orders welcome. One keychain or 200 parts, we treat both seriously.
  • Your idea stays yours. Happy to sign an NDA for product designs.

ye sab hum likh ke bhi de sakte hain ✍️

12 / Reviews

Reviews? Abhi zero. 😅

We're new, and we'd rather be honest than fill this space with fake stars. Your order could be our very first story, and we'll treat it that way.

Be our first customer
"…"
— aapka naam yahan ho sakta hai ✍️

13 / FAQ

Sawaal? Jawaab yahan.

Aur kuch poochna hai? Seedha WhatsApp karo →

sabse zyada puche gaye sawaal 👇

I don't have a 3D file. Can you still help?

Yes. Send a photo, sketch or measurements, or the broken part itself. We create the 3D model for you (design starts from ₹300 per hour, depending on complexity).

How much does 3D printing cost?

Printing starts at ₹5 per gram for PLA. Price depends on weight, material, infill and quantity. Use the instant quote above for an estimate. Minimum order is ₹300.

How long does it take?

Most small prints are ready in 2–4 days. Design projects and large quantities take longer, and we'll tell you the timeline with the quote.

Which file formats do you accept?

STL, 3MF, OBJ and STEP. If you have something else, send it and we'll check.

What is the maximum size you can print?

Up to about 25 × 25 × 25 cm in one piece. Bigger objects can be printed in parts and joined.

How do I pay?

UPI, bank transfer or cash. 50% advance to start, and the rest on delivery.

Do you deliver?

Yes, local pickup or delivery in Gurugram and Delhi NCR, and courier across India.

14 / Contact

Chalo, banate hain.

Tell us what you want to make. A real human (one of us two) usually replies within a few hours.

Opens WhatsApp with your message ready to send.

hum sach mein reply karte hain, bot nahi hain 🤞

⚡ Instant price